|
| |
|
|
Dependance of pavement surface skid resistance on aggregate polishing and traffic loading
Dašková, Jaroslava ; Čelko,, Ján (referee) ; Šachl,, Jindřich (referee) ; Vojtěšek, Antonín (referee) ; Kudrna, Jan (advisor)
Road safety is a complex problem. It is influenced mainly by the driver, the vehicle and the road surface. This thesis is focused on the road surface properties and especially skid resistance that directly affect the braking distance and keeping the vehicle in the horizontal curves and thus traffic accidents. The thesis deals with the durability of pavement surface skid resistance, the type of pavement layers and aggregate polishing used in wearing course. The aim of this thesis was to develop the methodology for improvement of road surfaces skid resistance durability and implementation of functional test for their assessment.
|
|
|
Evaluation and modelling of Traffic Noise
Černoch, Adam ; Spies, Karel (referee) ; Kudrna, Jan (advisor)
The task of the master's thesis is introduction with the problems of traffic noise, focusing on noise from road traffic. There is a description what is the noise, how it is formed, its resources and what are the methods of measuring. The following are the various noise reduction measures such as noise barriers and low noise pavements. The main attention is devoted to the noise generated at the tire / road that is reduced by these pavements. The practical part describes the implemented measurements on individual sections at various locations in our country. The measurement was carried by slightly modified method CPX with reference tire directly at the vehicle. The main aim was to evaluate the measurement data, make comparison of different low-noise surfaces with each other and with the commonly used surfaces. Then quantification of the rate reduction of the noise emission for a given section and verification of input data for noise modeling. In conclusion, the obtained results are summarized and based on them were confirmed very good acoustic properties with the recommendation to continue with measurements in the future.
|
|
|
Influence of the sample preparation on the stiffness of asphalt mixtures
Pěch, Pavel ; Hýzl,, Petr (referee) ; Varaus, Michal (advisor)
The Bachelor thesis deals with influence of the preparation of probationary bodies to determine of modulus of stiffness. Bodies in the form trapezoid are prepared in two different ways - with trimming and without trimming of all surfaces of the upper and lower party. This way prepared bodies are tested and is determined two-point test for modulus of stiffness. The results of tests are mutually compared.
|
|
|
Skid resistance of asphalt layers with recycled materials
Bambulová, Lucie ; Nekulová, Pavla (referee) ; Hýzl, Petr (advisor)
The diploma thesis deals with the problems of pavement surface skid resistence of wearing course of asphalt mixtures with R-material. Specifically, it is a mixture of type ACO 11 (asphalt concrete for wearing layers). In the theoretical part of the thesis there are dismantled the problems of Antiskid properties of the road surface and recycling of R-material. The practical part is dedicated to the design and laboratory production of the asphalt mixture ACO 11 without admixture of R-material and with content of 38 % R-material. In addition, the results of the measurement of friction coefficient after smoothed for these bitumen mixtures are shown in the work. The aim of the thesis was to determine the influence of the increased content of R-material on the anti-skid properties of the road surface as it is planned to update the standard ČSN EN 13108-1, which will allow the use of up to 40 % R-material into the mixtures of type ACO 11.
|
|
|
Usage of recycled material in asphalt surface layers
Malá, Markéta ; Komenda, Radek (referee) ; Hýzl, Petr (advisor)
Diploma thesis deals with adding R - material to the wearing asphalt courses, specifically to the SMA 11S. It has two parts – theoretical and practical. The theoretical part describes using R - material in the recycling of roads, different types of recycling and how is this problem handled in the Czech Republic, the practical part deals with the design of three kinds of asphalt mixtures with different added ratios of R – material, describing empirical and functional tests on the bitumen binder and the designed asphalt mixtures and the results of those tests.
|
|
|
Skid resistance of asphalt layers with recycled materials
Bambulová, Lucie ; Nekulová, Pavla (referee) ; Hýzl, Petr (advisor)
The diploma thesis deals with the problems of pavement surface skid resistence of wearing course of asphalt mixtures with R-material. Specifically, it is a mixture of type ACO 11 (asphalt concrete for wearing layers). In the theoretical part of the thesis there are dismantled the problems of Antiskid properties of the road surface and recycling of R-material. The practical part is dedicated to the design and laboratory production of the asphalt mixture ACO 11 without admixture of R-material and with content of 38 % R-material. In addition, the results of the measurement of friction coefficient after smoothed for these bitumen mixtures are shown in the work. The aim of the thesis was to determine the influence of the increased content of R-material on the anti-skid properties of the road surface as it is planned to update the standard ČSN EN 13108-1, which will allow the use of up to 40 % R-material into the mixtures of type ACO 11.
|
|
|
Usage of recycled material in asphalt surface layers
Malá, Markéta ; Komenda, Radek (referee) ; Hýzl, Petr (advisor)
Diploma thesis deals with adding R - material to the wearing asphalt courses, specifically to the SMA 11S. It has two parts – theoretical and practical. The theoretical part describes using R - material in the recycling of roads, different types of recycling and how is this problem handled in the Czech Republic, the practical part deals with the design of three kinds of asphalt mixtures with different added ratios of R – material, describing empirical and functional tests on the bitumen binder and the designed asphalt mixtures and the results of those tests.
|
|
|
Causes of runway surfacing failures at Karlovy Vary airport
Jůza, Petr ; Dašek, Ondřej ; Holcner, Petr
The modernized runway of Karlovy Vary airport was opened in the first half of 2006. However, significant failures of airport pavement occurred after one year of usage. During that time, these failures were massively developed. The risk of limitation (or in extreme cases, cancellation) of traffic on this runway occurred. That is why the Institute of Forensic Engineering of Brno University of Technology was asked by investor for working out the expert opinion in 2010. A total of 13 questions were asked. The main issue was identification of the causes of detected failures and determination of the responsibility of the individual litigants. This article is focused on this essential issue of referred opinion.
|
|
|
Dependance of pavement surface skid resistance on aggregate polishing and traffic loading
Dašková, Jaroslava ; Čelko,, Ján (referee) ; Šachl,, Jindřich (referee) ; Vojtěšek, Antonín (referee) ; Kudrna, Jan (advisor)
Road safety is a complex problem. It is influenced mainly by the driver, the vehicle and the road surface. This thesis is focused on the road surface properties and especially skid resistance that directly affect the braking distance and keeping the vehicle in the horizontal curves and thus traffic accidents. The thesis deals with the durability of pavement surface skid resistance, the type of pavement layers and aggregate polishing used in wearing course. The aim of this thesis was to develop the methodology for improvement of road surfaces skid resistance durability and implementation of functional test for their assessment.
|
guest ::
